Operating voltage: DC12V/24V
Operating temperature: -40 degrees to 80 degrees
Operating frequency: 433MHZ
Receiving sensitivity: ¡Ý-95dB
Output mode: point lock, self lock and interlock
Remote control distance: 30-50m/98.4-164ft
After the controller is powered on, the indicator lamp is always in light state, then press the learning button for 2~3 seconds, the indicator lights automatically goes off, release the learning button, press any key of the remote control, and the indicator flash 4 times, indicating the success of learning.
Note: The controller can learn fixed code, learning code and other 16 different encoding, any key remote control, If you go beyond, you'll remove the earliest learning remote controller in turn.
Continue to hold down the learning key for about 8 seconds, the indicator lights from extinction to recovery, which indicating the cleaning is success.
Connect 12V/24v DC output: The input terminal of 12V/24V two way remote control switch is connected with a DC power supply of 12V/24V, and the common end of the output terminal is connected to the positive pole of 12V/24V.
The positive pole of the bulb is connected to the beginning of the output terminal, and the negative electrode of the bulb is connected to the negative electrode of the power supply
1 x Remote Control Switch
5 x Two Keys Remote Controls
Remote control distance: 30-50m/ 98.4-164ft
Switch size: approx. 75*52*30mm/ 2.95*2.04*1.18inch
Controller size: approx. 55*40*12mm/ 2.16*1.57*0.47inch
Compact and lightweight, easy to install, safe and reliable to use
Using Intelligent microprocessor control, which can be applied to garage door control, light control, remote control curtain, access control system and all kinds of motor control systems