Dual USB Charger Multi-Outlets and Duplex Receptacle White 2.4A/5V High Speed 15-Amp/125V Receptacle Wall Socket Wall Plate

Price:
Product prices and availability are accurate as of 2018-10-16 09:15:29 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Product Introduction

2 USB ports with a super high current power of 2.4 Amp, SVDC.

Charges most compatible electrical devices directly without an adapter.

For use in public and private areas: homes, offices, hotels, cafes, etc.

Size:3.75 x 2.25 x 3 3/16 (Total = 20.3 cu-in.).

ETL listed.
FCC approved.
Installation
WARNING: To avoid the risk of fire, shock and/or death, turn power OFF at circuit breaker or fuse. Always test that the power is OFF before wiring.
This device must be installed and used in accordance with appropriate electrical codes and regulations.
If you are unsure or uncomfortable with performing the installation, please consult a qualified electrician.
1.GENTLY remove the old faceplate with a slotted screwdriver.
2.Carefully remove the existing screws and receptacle from the box.
3.Disconnect the wiring from the old receptacle.
4.Connect the outlet per wiring diagram. The black wire leads to hot wire. White leads to neutral wire. Green leads to ground wire.
5. Tighten all screws using 9-12 pounds per inch (1.0-1.4N-m) of torque to ensure no bare conductors are exposed.
6.Carefully insert the outlet into the wall box.
7.Secure the outlet in the wall box with the screws provided.
8.Replace the wall plate.
9.Once installation is complete, restore power at circuit breaker.
Wiring Diagram
Feed wires through the electrical box.
Wire the receptacle according to the instructions above.
Install and mount the receptacle into the electrical box using the screws provided.
Gently snap on the faceplate.
Turn main circuit power ON to test and use your device.

Product Features

1.Dual USB Charger Outlet?Ultra-high-speed charging , 2 USB devices at the same time at high speed without adapter charging,The use of high quality ABS plastic and metal material, not easy to break 2.Dual USB Charger Outlet?Smart intelliChip charging by reading the power need and delivering optimal power charge accordingly 3.Dual USB Charger Outlet?Two USB ports with total 2.4 AMP 5VDC, Receptacle Rating: 15A, 125VAC, 60Hz 4.Standard wall plate; Back and side wiring option; ETL Listed 5.If you have any questions please contact us by mail, our staff will immediately handle and reply

Write a Review