Owfeel DC 12V 12 Channels Relays Learning Smart Wireless Remote Control Switch White Transmitter Red Button(Remote Distance: 150m)

Price: $31.09
Product prices and availability are accurate as of 2019-03-07 00:56:11 EST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 1-2 business days
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Specifications:

Transmitter
Operating Voltage: 12V
Operating Frequency: 433Mhz
Vibration Resistance: 4.7M
Chip Type: 2264
Modulation: ASK (Stable, less interference)
Encode Type: Welding code
Battery Type: 12V 23A(not included)
Remote Distance: 150m (Theoretical value)
Ambient TEMP: -30°C -70°C, Humidity<95%
Product DIM: 95x48x14mm

Receiver
Input Voltage: DC 12V
Operating Frequency: 433Mhz
Output Type: Passive Output
Max load: 7A
Ambient TEMP: -20°C -65°C , Humidity<95%
Factory Default:Inching
Board DIM: 93x73x17mm
Case DIM: 110x80x28mm


Operating Mode:
inching:Press "3", the red light will turn off, it means that the transmitter and receiver finish linking.
Self-lock:Press"9", the red light will turn off, it means that the transmitter and receiver finish linking.
Inter-lock:Press"6", the red light will turn off, it means that the transmitter and receiver finish linking.

Package Includes:

Program Mode in:
Hold down button until LED lights and release button while lit. LED will stay on. Press any key on remote. LED will flash twice confirming successful. Now press remote keys and relays will function as programmed. Inching= Single relay will stay on only as long as corresponding remote key is pressed.
Self-locking = Press corresponding key for on, press same key again for off, each relay independently.
Interlock = For each relay: press corresponding key for on (all others off).

Reprogram:
Hold the button down (about 3 sec.) until the LED lights up, then push a button on the transmitter. You should see the LED flash rapidly to show that it is accepting the signal. Release the button and you are finish link transmitter with receiver.

Package Includes:
1X Transmitter (Battery is not included)
1X Receiver
1X User's manual

Product Features

1.Twelve channels of output, the output can be independent, but also inching and interlocked. 2.Wireless coding technology, no direction, switch without disturbing each other 3.Adopting larger capacity relay, can control electrical equipment of more than 1000W 4.Applied to: Remote control of the on and off of pump, machine-tool, LED lights and other Civil and industrial supporting remote areas. 5.Learning type can be paired with more than one control.

Write a Review