Battery Type: 12V 23A(not includ)
Remote Distance: 150m (Theoretical value)
Input Voltage: DC 12V
Operating Frequency: 433MHZ
Operation Way: Inching, Self-locking, Interlocked
Coding Way: Intelligent Learning
Output Type: Active output(12V)
Factory Default: Inching
Board Dimension: 115x73x17mm
Operation Way and Steps:
Inching mode: The output relay remains on as long as the transmitter button is depressed.
Self-Locking mode: Press one button, the relay turns on, press again, the relay turns off
Interlocked mode: Press one button, the relays turns on, press again, it turns off
Programming the control:
To change the mode, you should clear the memorized code first. Press the button on the receiver for several seconds until the light turns off.
For inching mode, just leave the position "1" and "2" empty
For self-locking mode, insert the Jumper into the position "2"
For interlocked mode, insert the Jumper into the position "1"
How to Link
Whenever the receiver mode is changed, the transmitter must be learned by (linked to) the receiver. This is done by pressing the button on the receiver until the red light on the receiver turns on. At that point release the button on the receiver. The red light will stay on. When you press a transmitter button, the red light will flash two long times and then rapidly flash. At this point, the transmitter and receiver are linked. When the button is released and pressed again, the associated relay on the receiver will turn on.
1.16 channels of output, the output can be independent, but also inching and interlocked.
2.Using wireless encoding technique, no direction, no mutual interference
3.Using large-capacity relay, can control appliances and equipment of more than 1000W
4.Mainly applied for: Remote control of the on and off of pump, machine-tool, LED lights and other Civil and industrial supporting remote areas.
5.Learning type can be paired with more than one control.