Owfeel DC 12V 4CH 30-50M Wireless Remote Control Relay Switch Transceiver + Receiver Peach Wood Type

Price:
Product prices and availability are accurate as of 2018-10-08 09:44:00 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Specifications:

Transmitter
Operating Voltage: 12V
Operating Frequency: 433Mhz
Vibration Resistance: 4.7M
Chip Type: 2264
Modulation: ASK (Stable, less interference)
Encode Type: Bonding pad welding code
Battery Type: 12V 23A(not included)
Remote Distance: 30-50m (Theoretical value)
Ambient TEMP: -30°C -70°C, Humidity<95%
Product DIM: 60x38x13mm

Receiver
Operating Voltage: DC 12V
Operating Frequency: 433Mhz
Output Type: Passive Output?12V) Max load: 7A
Ambient TEMP: -20°C-65°C, Humidity<95%
Factory Default:Inching
Board DIM: 69x49x17mm
Case DIM: 75x65x29mm


Operating Mode:
Hold down button until LED lights. Continue to hold. LED will go off. Continue to hold.
LED will flash once. Release button now for inching mode. Or continue to hold.
LED will flash twice. Release button now for self-locking mode. Or continue to hold.
LED will flash three times. Release button for interlock mode.


Program Mode in:
Hold down button until LED lights and release button while lit. LED will stay on. Press any key on remote. LED will flash twice confirming successful. Now press remote keys and relays will function as programmed. Inching= Single relay will stay on only as long as corresponding remote key is pressed.
Self-locking = Press corresponding key for on, press same key again for off, each relay independently.
Interlock = For each relay: press corresponding key for on (all others off).

Reprogram:
Hold the button down (about 3 sec.) until the LED lights up, then push a button on the transmitter. You should see the LED flash rapidly to show that it is accepting the signal. Release the button and you are finish link transmitter with receiver.

Package Includes:
2X Transmitter (Battery is not included)
1X Receiver
1X User's manual

Product Features

1.Encoding Wireless Transmitter Remote Control Switch 2.Easy to install and use. The wireless signal can pass through walls, floors and doors 3.Turn on or turn off the receiver with transmitter (remote control) from any place within a reliable distance 4.Using large-capacity relay, can control appliances and equipment of more than 1000W 5.Applies to: remote control electric doors, windows, switches, door control LED lamps, motors, circuit

Write a Review